Number2 Posted June 22, 2006 Share Posted June 22, 2006 Hi everyone! Haven't posted on this forum in a while - Not since Andymanchesta had helped me out in the spyware hell section a few months back - Anyways, back to the problem. My old Windows98SE computer seems to be dieing. I tried to install a new cdrom drive for that computer but after installing it, the computer won't startup. Even when I take it out, it still won't start up. It makes 1 long beep, followed by 3 shorter beeps... and then just stops. I can't really see whats happening since my monitor isn't showing anything either. I did some really limited research in google on my own WindowsXp computer and found out that this is a common bios hat has a pretty descriptive beep pattern. 1 long, 3 short = Conventional/Extended memory failure. There was also a note that said this code can also occur if something is wrong with the motherboard, so the code here is only useful if the motherboard itself is reporting the error properly. I followed the instructions on some of the websites, and they all say it's because of my DRAM stick. "the most likely problem is either fault RAM, or improperly seated RAM (try reseating the RAM or moving it around to different slots)." I tried this... but with no success. I only have 1 memory stick That computer stalls quite often, and the reset button does get pushed quite a bit... I know I had installed everything correctly. I really don't want to lose that computer... Can someone help me? ~Number2 Link to comment Share on other sites More sharing options...
DjLizard Posted June 22, 2006 Share Posted June 22, 2006 Does anything on the motherboard look like this? (capacitor plague) If so, it's new computer time. Click here if CCleaner Issues are re-appearing DjLizard.net DjLizard.net wiki Dial-a-fix Dial-a-fix tips DjLizard.net software support forum Do you live in Bradenton, Sarasota, Tampa, or St. Petersburg, Florida? Visit Digital Doctors where I work Link to comment Share on other sites More sharing options...
Number2 Posted June 22, 2006 Author Share Posted June 22, 2006 No, sir. Everything seems to be intact with no rust or bulging in the caps. Although I must add that it's extremely dusty... Could dust be a problem? I tried blowing out most of it, but there's still lots stuck in there. ~Number2 Link to comment Share on other sites More sharing options...
MikeW Posted June 22, 2006 Share Posted June 22, 2006 Code depends on what Bios is in use check this link. it could be keyboard ar vga card http://www.pctechnicians.ca/help/pcguide.html Win 7 Home Premium 64 bit - IE11 - Nod32 - Mbam pro Link to comment Share on other sites More sharing options...
Number2 Posted June 22, 2006 Author Share Posted June 22, 2006 Code depends on what Bios is in use check this link. it could be keyboard ar vga card How do I know what Bios is in use? I'm thinking it's the IBM one... but i'm not sure... It's not the keyboard, It could be the Video (EGA) Display Circuitry... How would I go about fixing that? ~Number2 Link to comment Share on other sites More sharing options...
MikeW Posted June 22, 2006 Share Posted June 22, 2006 Try removing the videao card and reseating it. Double check all of your pc's internal connections. You may have just disturbed a connection when fitting the new drive. Win 7 Home Premium 64 bit - IE11 - Nod32 - Mbam pro Link to comment Share on other sites More sharing options...
Number2 Posted June 22, 2006 Author Share Posted June 22, 2006 Hey MikeW, I'm sorry for being kind of newbie to this, but I'm not sure exactly where the videocard is... I know it's probably placed differently in different computers so I took some really poor quality pictures with my webcam... If you can save it on paint and just highlight/circle approx. where it should be, i'll try to find it and readjust it. http://img506.imageshack.us/my.php?image=picture30ir.jpg http://img74.imageshack.us/my.php?image=picture26zn.jpg http://img378.imageshack.us/my.php?image=picture42ys.jpg http://img378.imageshack.us/my.php?image=picture58bo.jpg http://img354.imageshack.us/my.php?image=picture62rg.jpg I tried my best to take some good shots, but my webcam just couldn't handle it =/ I hope these images help a little bit. Thanks for your help so far MikeW. ~Number2 Link to comment Share on other sites More sharing options...
MikeW Posted June 23, 2006 Share Posted June 23, 2006 Easiest way to find it is to look where you plug your monitor cable into, and that is the card. Win 7 Home Premium 64 bit - IE11 - Nod32 - Mbam pro Link to comment Share on other sites More sharing options...
Number2 Posted June 23, 2006 Author Share Posted June 23, 2006 Thanks MikeW! You ROCK! Turned out all I needed to do was push down the VGA card a little bit so it's a little more snug in it's seat and voila! It's alive! thank you thank you thank you! I think i'll start donating to this site. ~Number2 Link to comment Share on other sites More sharing options...
MikeW Posted June 23, 2006 Share Posted June 23, 2006 Glad to help, being a simple soul I always go for the easy fix first Win 7 Home Premium 64 bit - IE11 - Nod32 - Mbam pro Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now