Jump to content
Piriform Community Forums
ardo

State Enabled, Output devices support, Unsafe

Recommended Posts

My second monitor a Samsung SA550 is in a two monitor setup, Running speccy show this message 'State Enabled, Output devices support, Unsafe''. i am worried this morning I had to replace a similar monitor on this same PC   that gave the same description in speccy and that could not display  anything on the screen except for a message that it does not receive any signal from the AMD V4900 firegl video card. The replacement monitor SA550 gives a perfect image but when  running speccy the same message is displayed. Here is the message

 

Monitor 2

Name SMS23A550H on ATI FirePro V (FireGL V) Graphics Adapter
Current Resolution 1920x1080 pixels
Work Resolution 1920x1080 pixels
State Enabled, Output devices support, Unsafe
Multiple displays Extended, Secondary, Enabled
Monitor Width 1920
Monitor Height 1080
Monitor BPP 32 bits per pixel
Monitor Frequency 60 Hz
Device \\.\DISPLAY2\Monitor0
 
ATI AMD FirePro V4900 (FireGL V)
Manufacturer ATI
Model AMD FirePro V4900 (FireGL V)
GPU Turks
Device ID 1002-6749
Subvendor ATI (1002)
Current Performance Level Level 0
Current GPU Clock 800 MHz
Current Memory Clock 1000 MHz
Current Shader Clock 1000 MHz
Voltage 1.100 V
Die Size 118 mm²
Transistors 716 M
Release Date Nov 2011
DirectX Support 11.0
GPU Clock 800,0 MHz
Temperature 54 °C
Core Voltage 1.100 V
Driver version 15.201.2401.0
BIOS Version 113-C3380201-100
ROPs 8
Shaders 480 unified
Memory Type GDDR5
Memory 1024 MB
Bus Width 128 bit
Pixel Fillrate 6,4 GPixels/s
Texture Fillrate 19,2 GTexels/s
Bandwidth 64,0 GB/s
Count of performance levels : 3
Level 1 - "Perf Level 0"
GPU Clock 100 MHz
Shader Clock 150 MHz
Level 2 - "Perf Level 1"
GPU Clock 400 MHz
Shader Clock 1000 MHz
Level 3 - "Perf Level 2"
GPU Clock 800 MHz
Shader Clock 1000 MHz
 
What is the meaning of the ' State: Unsafe'  ? The old monitor that I replaced was 3 years old. Its replacement is 2 years old. What do you recommend ?
Thanks
Ardo

 

Share this post


Link to post
Share on other sites

6 Years ago I answered a simular thread by saying

 

I've still not seen a Developer's answer to this one, but I can tell you not to worry. Most of us have it saying "unsafe". I believe it is perfectly safe to have it be unsafe.
Today I'm going to direct the developers to this thread so it can be answered by them

Share this post


Link to post
Share on other sites

I think Unsafe may mean either the driver is outdated, one (or both) monitor is not using a native resolution or both monitors aren't on the same resolution.

 

I use 2 Flatron's, same make/model, same (recommended) resolution, same frequency and don't show Unsafe.

 

 

purely from a curiosity aspect, can you start an elevated command prompt, type in wmic, hit Enter, then paste this in; PATH Win32_VideoController WHERE "VideoProcessor LIKE '%amd%'" GET /format:list

what does ErrorCleared, LastErrorCode and Status say?

can you see the word Unsafe anywhere?

if not, then it's probably not WMI but Speccy doing some calculations.

Share this post


Link to post
Share on other sites

Hi mta & Nergal

I don't know why my copy-paste didn't work at command prompt. I had to type the string completely . I was able to paste the string in a file only.

 

Here are the results: I can not see the word 'Unsafe' in any of the displayed lines.

 

ErrorCleared=

LastErrorCode=

Status=OK

Statusinfo=

Its true that I have two different monitors connected. 

  DELL U2515H on ATI FirePro V (FireGL V) Graphics Adapter (2560X1440 pixwls)

  SMS23A550H on ATI FirePro V (FireGL V) Graphics Adapter (1929X1080 pixels)

 

The Dell remplaced a year ago another similar Samsung SA550 monitor. I had no display problem with my new setup  with this actual setup, up to yesterday when the Samsung SA550 was displaying that it coudn't find the signal from the AMD firegl V4900, after its replacement the monitor displayed  immediately  an image. 

 

 

Thanks a lot for your help , it is much appreciated

regards

Ardo

Share this post


Link to post
Share on other sites

I just forgot to mention that both monitors display in speccy the same message

 

State Enabled, Output devices support, Unsafe

Share this post


Link to post
Share on other sites

I get this message too with only 1 monitor and it's a brand new pc, I just built. This has been passed on to the proper people at Piriform and we are waiting for an answer.

Share this post


Link to post
Share on other sites

Hello,

Are you still waiting for any answer from Piriform?

I've the same issue for my monitors (2 out of 3 show Unsafe). WMIC reports no error and status OK.

Looks like Piriform support is not really responsive.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×