Jump to content
CCleaner Community Forums
winactive

Speccy posting identical SMART data from HDD to External HDD

Recommended Posts

Here is an excerpt from the Speccy .txt snapshot file;

 

 

Storage

Hard drives
WDC WD5000LPVX-22V0TT0
Manufacturer Western Digital
Heads 16
Cylinders 60,801
Tracks 15,504,255
Sectors 976,768,065
SATA type SATA-III 6.0Gb/s
Device type Fixed
ATA Standard ACS2
Serial Number WD-WX61AA4PJFK7
Firmware Version Number 01.01A01
LBA Size 48-bit LBA
Power On Count 589 times
Power On Time 28.6 days
Speed 5400 RPM
Features S.M.A.R.T., APM, NCQ
Max. Transfer Mode SATA III 6.0Gb/s
Used Transfer Mode SATA III 6.0Gb/s
Interface SATA
Capacity 465 GB
Real size 500,107,862,016 bytes
RAID Type None
S.M.A.R.T
Status Good
Temperature 34 °C
Temperature Range OK (less than 50 °C)
S.M.A.R.T attributes
01
Attribute name Read Error Rate
Real value 0
Current 200
Worst 200
Threshold 51
Raw Value 0000000000
Status Good
03
Attribute name Spin-Up Time
Real value 1566 ms
Current 148
Worst 145
Threshold 21
Raw Value 000000061E
Status Good
04
Attribute name Start/Stop Count
Real value 2,305
Current 98
Worst 98
Threshold 0
Raw Value 0000000901
Status Good
05
Attribute name Reallocated Sectors Count
Real value 0
Current 200
Worst 200
Threshold 140
Raw Value 0000000000
Status Good
07
Attribute name Seek Error Rate
Real value 0
Current 200
Worst 200
Threshold 0
Raw Value 0000000000
Status Good
09
Attribute name Power-On Hours (POH)
Real value 28d 14h
Current 100
Worst 100
Threshold 0
Raw Value 00000002AE
Status Good
0A
Attribute name Spin Retry Count
Real value 0
Current 100
Worst 100
Threshold 0
Raw Value 0000000000
Status Good
0B
Attribute name Recalibration Retries
Real value 0
Current 100
Worst 100
Threshold 0
Raw Value 0000000000
Status Good
0C
Attribute name Device Power Cycle Count
Real value 589
Current 100
Worst 100
Threshold 0
Raw Value 000000024D
Status Good
BF
Attribute name G-sense error rate
Real value 16
Current 84
Worst 84
Threshold 0
Raw Value 0000000010
Status Good
C0
Attribute name Power-off Retract Count
Real value 11
Current 200
Worst 200
Threshold 0
Raw Value 000000000B
Status Good
C1
Attribute name Load/Unload Cycle Count
Real value 8,350
Current 198
Worst 198
Threshold 0
Raw Value 000000209E
Status Good
C2
Attribute name Temperature
Real value 33 °C
Current 110
Worst 100
Threshold 0
Raw Value 0000000021
Status Good
C4
Attribute name Reallocation Event Count
Real value 0
Current 200
Worst 200
Threshold 0
Raw Value 0000000000
Status Good
C5
Attribute name Current Pending Sector Count
Real value 0
Current 200
Worst 200
Threshold 0
Raw Value 0000000000
Status Good
C6
Attribute name Uncorrectable Sector Count
Real value 0
Current 100
Worst 253
Threshold 0
Raw Value 0000000000
Status Good
C7
Attribute name UltraDMA CRC Error Count
Real value 0
Current 200
Worst 200
Threshold 0
Raw Value 0000000000
Status Good
C8
Attribute name Write Error Rate / Multi-Zone Error Rate
Real value 0
Current 100
Worst 253
Threshold 0
Raw Value 0000000000
Status Good
Partition 0
Partition ID Disk #0, Partition #0
File System NTFS
Volume Serial Number 74CFAA9B
Size 599 MB
Used Space 261 MB (43%)
Free Space 338 MB (57%)
Partition 1
Partition ID Disk #0, Partition #1
Size 300 MB
Partition 2
Partition ID Disk #0, Partition #2
Disk Letter C:
File System NTFS
Volume Serial Number 9C5C7CD8
Size 449 GB
Used Space 77 GB (17%)
Free Space 371 GB (83%)
Partition 3
Partition ID Disk #0, Partition #3
File System NTFS
Volume Serial Number F0D24883
Size 15.4 GB
Used Space 13.8 GB (89%)
Free Space 1.57 GB (11%)
Seagate Expansion USB Device
Heads 16
Cylinders 121,601
Tracks 31,008,255
Sectors 1,953,520,065
SATA type SATA-III 6.0Gb/s
Device type Fixed
ATA Standard ACS2
Serial Number WD-WX61AA4PJFK7
Firmware Version Number 01.01A01
LBA Size 48-bit LBA
Power On Count 589 times
Power On Time 28.6 days
Speed 5400 RPM
Features S.M.A.R.T., APM, NCQ
Max. Transfer Mode SATA III 6.0Gb/s
Used Transfer Mode SATA III 6.0Gb/s
Interface USB (SATA)
Capacity 931 GB
Real size 1,000,204,885,504 bytes
RAID Type None
S.M.A.R.T
Status Good
Temperature 34 °C
Temperature Range OK (less than 50 °C)
S.M.A.R.T attributes
01
Attribute name Read Error Rate
Real value 0
Current 200
Worst 200
Threshold 51
Raw Value 0000000000
Status Good
03
Attribute name Spin-Up Time
Real value 1566 ms
Current 148
Worst 145
Threshold 21
Raw Value 000000061E
Status Good
04
Attribute name Start/Stop Count
Real value 2,305
Current 98
Worst 98
Threshold 0
Raw Value 0000000901
Status Good
05
Attribute name Reallocated Sectors Count
Real value 0
Current 200
Worst 200
Threshold 140
Raw Value 0000000000
Status Good
07
Attribute name Seek Error Rate
Real value 0
Current 200
Worst 200
Threshold 0
Raw Value 0000000000
Status Good
09
Attribute name Power-On Hours (POH)
Real value 28d 14h
Current 100
Worst 100
Threshold 0
Raw Value 00000002AE
Status Good
0A
Attribute name Spin Retry Count
Real value 0
Current 100
Worst 100
Threshold 0
Raw Value 0000000000
Status Good
0B
Attribute name Recalibration Retries
Real value 0
Current 100
Worst 100
Threshold 0
Raw Value 0000000000
Status Good
0C
Attribute name Device Power Cycle Count
Real value 589
Current 100
Worst 100
Threshold 0
Raw Value 000000024D
Status Good
BF
Attribute name G-sense error rate
Real value 16
Current 84
Worst 84
Threshold 0
Raw Value 0000000010
Status Good
C0
Attribute name Power-off Retract Count
Real value 11
Current 200
Worst 200
Threshold 0
Raw Value 000000000B
Status Good
C1
Attribute name Load/Unload Cycle Count
Real value 8,350
Current 198
Worst 198
Threshold 0
Raw Value 000000209E
Status Good
C2
Attribute name Temperature
Real value 33 °C
Current 110
Worst 100
Threshold 0
Raw Value 0000000021
Status Good
C4
Attribute name Reallocation Event Count
Real value 0
Current 200
Worst 200
Threshold 0
Raw Value 0000000000
Status Good
C5
Attribute name Current Pending Sector Count
Real value 0
Current 200
Worst 200
Threshold 0
Raw Value 0000000000
Status Good
C6
Attribute name Uncorrectable Sector Count
Real value 0
Current 100
Worst 253
Threshold 0
Raw Value 0000000000
Status Good
C7
Attribute name UltraDMA CRC Error Count
Real value 0
Current 200
Worst 200
Threshold 0
Raw Value 0000000000
Status Good
C8
Attribute name Write Error Rate / Multi-Zone Error Rate
Real value 0
Current 100
Worst 253
Threshold 0
Raw Value 0000000000
Status Good
Partition 0
Partition ID Disk #1, Partition #0
Disk Letter E:
File System NTFS
Volume Serial Number E280E832
Size 931 GB
Used Space 493 GB (53%)
Free Space 437 GB (47%)
 

 

This also occurs when connecting another USB drive of a different make, the values from the HDD SMART are reported for the External HDD.

 

I have highlighted the start of the data for each drive. The partition sizes and structure is interpreted per drive but HW IDs and SMART table data is just duplicated. I have tried the portable builds and the result is the same on 32-bit and 64-bit versions of Speccy.

Share this post


Link to post
Share on other sites

I too am seeing the same error

speccy 1.29.714

Computer: HP envy notebook

HD 1 T Hybrid

Windows 8.1 Pro x64

attached 2 USB external drives

 

I won't repeat all the info winactive did unless someone wants it, but I see the same problem as the area he highlighted.  The two external drives show the same info as the internal drive.  One other thing I see is an entry that only exists for one of the external drives.

 

The drive is a Hitachi Model - HUA722020ALA330

There is this entry:

 

Model Capacity For This Specific Drive    200GB
 

which is not correct.  This is a 2T drive

 

But this entry is correct:

 

Real size    2,000,398,934,016 bytes
 

Share this post


Link to post
Share on other sites

Just checked another machine.  It's external drive is connected via eSATA and the information looks right.   I didn't acutally verify the info but it is different than the internal 'C' drive.  I will shut this down (it's not here at this computer) when I go to that machine, reconnect the drive as a USB3 and see what is reported.  Also the other two internal drives seem to be reporting correct information.  Internally this machine has two 1G Western drives and one 1/2 G Intel SDHD in addition to the external 4G Hitachii.

 

2015-12-14 - correction

 

I was wrong.  The external drive showing correct information is connected via USB.  USB3.  That external enclosure is a newer one made by the same company as the other (Vantec).   I will next try eSATA and also connect to a USB2 port with a USB2 cable.

Share this post


Link to post
Share on other sites

I have now connected a Seagate Expansion Portable 1TB via USB (doesn't matter if USB 2.0/3.0).

 

The SMART info is correct for the Seagate external drive, but the WD MyPassport Ultra still has the duplicate data. I suspect this may well be a firmware issue on drives or how Speccy interrogates them.

Share this post


Link to post
Share on other sites

I am seeing the same thing with the latest Speccy (1.29).

My primary disk-drive is a 6Gb/second SSD. See below.

My motherboard is an MSI, with built-in RAID support.

My secondary disk-drive is a 'RAID-1' pair of Seagate 500GB drives.

The volume-serial-number for the RAID set is showing the same as the SSD disk,

and the SMART data is for the OCZ.

----

Storage
~~Hard drives
~~~~OCZ-VERT OCZ-VERTEX3 SCSI Disk Device
~~~~Intel Raid 1 Volume SCSI Disk Device

~~~~~Manufacturer~Intel
~~~~~Heads~16
~~~~~Cylinders~60,800
~~~~~Tracks~15,504,000
~~~~~Sectors~976,752,000
~~~~~SATA type~SATA-III 6.0Gb/s
~~~~~Device type~Fixed
~~~~~ATA Standard~ATA8-ACS
~~~~~Serial Number~OCZ-7GZMV3JV4OKLG4JP
~~~~~Firmware Version Number~2.22
~~~~~LBA Size~48-bit LBA
~~~~~Power On Count~24 times
~~~~~Power On Time~1.0 days
~~~~~Speed~Not used (SSD Drive)
~~~~~Features~S.M.A.R.T., APM, NCQ, TRIM, SSD
~~~~~Max. Transfer Mode~SATA III 6.0Gb/s
~~~~~Used Transfer Mode~SATA III 6.0Gb/s
~~~~~Interface~SATA
~~~~~Capacity~465 GB
~~~~~Real size~500,104,691,712 bytes
~~~~~RAID Type~None
~~~~~~S.M.A.R.T
~~~~~~~Status~Good
~~~~~~~Temperature~30 °C
~~~~~~~Temperature Range~OK (less than 50 °C)
~~~~~~~~S.M.A.R.T attributes
~~~~~~Partition 0
~~~~~~~Partition ID~Disk #1, Partition #0
~~~~~~~Disk Letter~E:
~~~~~~~File System~NTFS
~~~~~~~Volume Serial Number~7A4BA287
~~~~~~~Size~465 GB
~~~~~~~Used Space~130 GB (28%)
~~~~~~~Free Space~335 GB (72%)

 

END

Share this post


Link to post
Share on other sites

Also Speccy doesn't show physical drives from Storage Spaces, only shows logical drives from it and SMART attributes from first internal non-Storage Space drive.

Share this post


Link to post
Share on other sites

I confirm, that USB drives show information from first internal drive

 

Me too...  From Speccy Professional Edition:

 

Storage

Hard drives

WDC WD10EZEX-21M2NA0

                                        Manufacturer      Western Digital

                                        Heads        16

                                        Cylinders    121,601

                                        Tracks       31,008,255

                                        Sectors      1,953,520,065

                                        SATA type  SATA-III 6.0Gb/s

                                        Device type Fixed

                                        ATA Standard      ACS2

                                        Serial Number     WCC3F3PLJTS1

                                        Firmware Version Number     01.01A01

                                        LBA Size     48-bit LBA

                                        Power On Count  249 times

                                        Power On Time    35.7 days

                                        Speed        7200 RPM

                                        Features    S.M.A.R.T., NCQ

                                        Max. Transfer Mode     SATA III 6.0Gb/s

                                        Used Transfer Mode     SATA III 6.0Gb/s

                                        Interface    SATA

                                        Capacity    931 GB

                                        Real size    1,000,204,886,016 bytes

                                        RAID Type  None

                                               

PHD 3.0 Silicon-Power USB Device

                                        Heads        16

                                        Cylinders    121,601

                                        Tracks       31,008,255

                                        Sectors      1,953,520,065

                                        SATA type  SATA-III 6.0Gb/s

                                        Device type Fixed

                                        ATA Standard      ACS2

                                        Serial Number     WCC3F3PLJTS1

                                        Firmware Version Number     01.01A01

                                        LBA Size     48-bit LBA

                                        Power On Count  249 times

                                        Power On Time    35.7 days

                                        Speed        7200 RPM

                                        Features    S.M.A.R.T., NCQ

                                        Max. Transfer Mode     SATA III 6.0Gb/s

                                        Used Transfer Mode     SATA III 6.0Gb/s

                                        Interface    USB (SATA)

                                        Capacity    931 GB

                                        Real size    1,000,204,886,016 bytes

                                        RAID Type  None

Share this post


Link to post
Share on other sites

I've just joined this forum in order to report this same bug!

 

I see this SMART data error on several machines where an external HDD is attached via a USB adaptor. The data reported for the external hard drive is identical to that for the internal hard drive.

 

I'm a little disappointed to note that no one from Piriform appears to have responded to this bug report so far, after six months. :(

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...