jakob91 Posted October 30, 2014 Share Posted October 30, 2014 Hi, I've been installing Speccy in my computer and I love it as I can monitor my temp and all, but something is bothering me. Here's a copypaste of my SSD from Speccy: KINGSTON SV300S37A120G ATA Device Manufacturer Kingston Product Family SSDNow Form Factor 2.5-inch Heads 16 Cylinders 14 593 Tracks 3 721 215 Sectors 234 436 545 SATA type SATA-III 6.0Gb/s Device type Fixed ATA Standard ATA8-ACS Serial Number xxxxxxxxxxxxxxxxxxxx LBA Size 48-bit LBA Power On Count 35 times Power On Time 2,9 days Speed Not used (SSD Drive) Features S.M.A.R.T., APM, NCQ, TRIM, SSD Max. Transfer Mode SATA III 6.0Gb/s Used Transfer Mode SATA III 6.0Gb/s Interface SATA-2 Capacity 111 GB Real size 120 034 123 776 bytes RAID Type None Speccy says "Speed = Not used (SSD Drive)" but my bios is clearly using this drive as an SSD. Interface: SATA-2 is also itching me as I'm using a SATA3 cable along a SATA3 board (Z97). I was on a phenom X4 955 up to a few days ago with this SSD using SATA2 cables on a SATA2 mobo for a few days and it was booting up much faster than it is doing now on a i5-4690k so I'm wondering is I'm missing something here. Any help is appreciated! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now