Speccy looping

[-Thomas-]

Hi.

 

I have installed the latest version of Speccy v1.16.317 on my Toshiba L500 laptop.

Speccy loads up the information for my system, However the loading status circle at the bottom just keeps going around & around & around & does not seem to stop at all.

 

 

I would also like to ask if it is possible to add support so the Graphics Card & Motherboard temperature display ?

AIDA64 can see this information, So hoping it can be added to Speccy aswell.

 

Below is a debug log with all options set as I didn't know which ones to select for this particular problem.

Speccy_log1_16_3173-3-2012_20-20.txt

[kenny825507]

latest version also still fails for me last two versions also failed dumps sent to mr ron

latest version gets so far and now brings up dialog box

 

 

for some reason debug does not work now as before

 

will investigate more

have sent dialog info

Have uninstalled 64 bit version and re-installed still the same

 

Debug starts log file 0 bytes tried ticking various box's same symtom no windows starts up just shows in task manager no cpu or i/o just hanging?

maybe due to new error interface being responsible

 

have run again with all box's ticked get this text file now

 

[2012-03-03 17:25:36] [iNFO ] CPU SDK at: C:\Users\Ken\AppData\Local\Temp speccycpuid.dll

[2012-03-03 17:25:36] [ERROR] The system cannot find the file specified. NewTreeNetwork.cpp(945)

[2012-03-03 17:25:36] [ERROR] Exception catched in file .\NewTreeNetwork.cpp, function NewTreeNetwork::NameFill, line 951

[2012-03-03 17:25:41] [iNFO ] Monitor enumerator handle: 0x4ED2F10h

[2012-03-03 17:25:41] [iNFO ] Monitor HardwareId: MONITOR\TOS5091 DriverId: {4d36e96e-e325-11ce-bfc1-08002be10318}\0001

[2012-03-03 17:25:41] [iNFO ] Monitor driver name: Intel® HD Graphics

[2012-03-03 17:25:41] [iNFO ] Monitor mirroring driver: False

[2012-03-03 17:25:41] [iNFO ] Monitor display device active: True

[2012-03-03 17:25:41] [iNFO ] monitor device ID = < MONITOR\TOS5091\{4d36e96e-e325-11ce-bfc1-08002be10318}\0001 >

[2012-03-03 17:25:41] [iNFO ] continue with monitor device ID = < MONITOR\TOS5091\{4d36e96e-e325-11ce-bfc1-08002be10318}\0001 >

[2012-03-03 17:25:41] [iNFO ] monitorNameStr.IsEmpty()

[2012-03-03 17:25:41] [iNFO ] monitorNameStr = < Generic PnP Monitor >

[2012-03-03 17:25:41] [iNFO ] Monitor driver name: Intel® HD Graphics

[2012-03-03 17:25:41] [iNFO ] Monitor mirroring driver: False

[2012-03-03 17:25:41] [iNFO ] continue with monitor device ID = < >

[2012-03-03 17:25:41] [iNFO ] monitorNameStr.IsEmpty()

[2012-03-03 17:25:41] [iNFO ] monitorNameStr = < >

[2012-03-03 17:25:41] [iNFO ] Monitor driver name: RDPDD Chained DD

[2012-03-03 17:25:41] [iNFO ] Monitor mirroring driver: True

[2012-03-03 17:25:41] [iNFO ] Monitor driver name: RDP Encoder Mirror Driver

[2012-03-03 17:25:41] [iNFO ] Monitor mirroring driver: True

[2012-03-03 17:25:41] [iNFO ] Monitor driver name: RDP Reflector Display Driver

[2012-03-03 17:25:41] [iNFO ] Monitor mirroring driver: True

[2012-03-03 17:25:41] [iNFO ] Driver: Try to load driver.

[2012-03-03 17:25:41] [iNFO ] Driver: Load driver OK.

[2012-03-03 17:25:41] [iNFO ] Driver: Driver unload OK.

 

If I run in Debug and do not tick all boxs it just hangs with no display ??? so two problems now

[Nergal]

kenny your issues are different don't hijack other people's threads start your own

[Pascal]

Its not my intent to steal a thread here, but I am seeing this problem as well. Same version of speccy (v1.16.317). I have two HP desktops on which the speccy loading status circle was spinning away without stopping. It works and finishes correctly on a Dell laptop. I don't know if its relevant, but the two systems in which the status circle was spinning do not have an Internet connection. The debugging logs look marked different to my inexpert eye. But I've included them below.

Speccy_log1_16_31729-6-2012_21-19.txt

Speccy_log1_16_31730-6-2012_5-15.txt