Moderators rridgely Posted November 6, 2005 Moderators Share Posted November 6, 2005 I found this cool little app on digg. Its a self contained program(no install) that tells you exactly what processes on your pc are connected to the net. Yeah I know there is other software that does this and most firewalls do but this is by far the clearest. Pretty cool little home written app. http://www.x32dev.com/connected/ Link to comment Share on other sites More sharing options...
Ultimate Predator Posted November 6, 2005 Share Posted November 6, 2005 Very nice, all I had was MSN (which I do not sue all the time, and a load of EZ Antivirus services connecting to the internet. Link to comment Share on other sites More sharing options...
SenutyEnool Posted November 6, 2005 Share Posted November 6, 2005 Very nice, all I had was MSN (which I do not sue all the time, and a load of EZ Antivirus services connecting to the internet. <{POST_SNAPBACK}> Hmmm, so how often do you 'sue' MSN??? Just pulling your leg Cheers Oh and thanks for the link rridgely Link to comment Share on other sites More sharing options...
Greenknight Posted November 7, 2005 Share Posted November 7, 2005 Sounds good, I can hardly wait til the additional features are ready! Link to comment Share on other sites More sharing options...
Eldmannen Posted November 7, 2005 Share Posted November 7, 2005 Ironically enough, the site is down and states. 509 Bandwidth Limit Exceeded The server is temporarily unable to service your request due to the site owner reaching his/her bandwidth limit. Please try again later. Link to comment Share on other sites More sharing options...
Moderators rridgely Posted November 7, 2005 Author Moderators Share Posted November 7, 2005 Ironically enough, the site is down and states. 509 Bandwidth Limit Exceeded The server is temporarily unable to service your request due to the site owner reaching his/her bandwidth limit. Please try again later. <{POST_SNAPBACK}> Its because the site got put on digg. Almost every site that gets posted there goes down because of bandwidth. Link to comment Share on other sites More sharing options...
Ultimate Predator Posted November 7, 2005 Share Posted November 7, 2005 Hmmm, so how often do you 'sue' MSN??? Just pulling your leg Oh well, you know m, always out to sue MSN, just can't help mself! Link to comment Share on other sites More sharing options...
Ptath Posted November 9, 2005 Share Posted November 9, 2005 Tried this little application ... When I ran it, I got an error message that came up as follows: Run-time error '453' Can't find DLL entry point AllocateAndGetTcpExTableFromStack in iphlpapi.dll Anyone know what this means? Link to comment Share on other sites More sharing options...
Mike Rochip Posted November 10, 2005 Share Posted November 10, 2005 The site is working (at least for now 5:05PM MST). Thanks rridgely! Link to comment Share on other sites More sharing options...
Moderators rridgely Posted November 10, 2005 Author Moderators Share Posted November 10, 2005 Wow this guy has already updated this app since I first downloaded it a couple days ago. If you got this before the sixth get the new version. Link to comment Share on other sites More sharing options...
Moderators TwistedMetal Posted November 10, 2005 Moderators Share Posted November 10, 2005 Nice app. It's now on my must have list. Your Friendly Neighborhood Piriform Forum Moderator Quick Links: CCleaner Products | CCleaner Documentation | Knowledge Center | Downloads | Lost License Key Link to comment Share on other sites More sharing options...
Ptath Posted November 10, 2005 Share Posted November 10, 2005 Nice app. It's now on my must have list. <{POST_SNAPBACK}> But but .... I just downloaded it again from the website. No problem in downloading it. However, when I run the application I get the error message I talked about earlier ... Run-time error '453' Can't find DLL entry point AllocateAndGetTcpExTableFromStack in iphlpapi.dll I'm a computer newb ... what does the error message mean? Link to comment Share on other sites More sharing options...
Moderators Andavari Posted November 10, 2005 Moderators Share Posted November 10, 2005 Can't find DLL entry point AllocateAndGetTcpExTableFromStack in iphlpapi.dll I'm a computer newb ... what does the error message mean? <{POST_SNAPBACK}> Make sure you have that file installed in: C:\WINDOWS\system32 If you don't have it you can download it from any site you wish via this Google search, reboot after installing it. If it still doesn't work you "may" need to register the file by clicking Start->Run and type in: regsvr32 "%windir%\system32\iphlpapi.dll" You "may" have to reboot after registering it. Link to comment Share on other sites More sharing options...
Ptath Posted November 10, 2005 Share Posted November 10, 2005 Make sure you have that file installed in: C:\WINDOWS\system32 If you don't have it you can download it from any site you wish via this Google search, reboot after installing it. If it still doesn't work you "may" need to register the file by clicking Start->Run and type in: regsvr32 "%windir%\system32\iphlpapi.dll" You "may" have to reboot after registering it. <{POST_SNAPBACK}> I found iphlpapi.dll in C:\WINNT\ServicePackFiles\i386 and in C:\WINNT\system32 I ran your command and got the following message: C:\WINNT\system32\iphlpapi.dll was loaded, but the DllRegisterServer entry point was not found. DllRegisterServer may not be exported, or a corrupt version of C:\WINNT\system32\iphlpapi.dll may be in memory. Consider using PView to detect and remove it. Therefore, I used your Google Search to find and download iphlpapi.dll to my Desktop, then overwrote the existing file (68.2 KB) with the downloaded file (75.5 KB). I then rebooted, downloaded the bandwidth program again, and tried to run it. I got the same error message as follows: Run-time error '453' Can't find DLL entry point AllocateAndGetTcpExTableFromStack in iphlpapi.dll Seems like my machine won't accept this application <sigh> Link to comment Share on other sites More sharing options...
Ultimate Predator Posted November 10, 2005 Share Posted November 10, 2005 Seems fine to me, just ran it from download, is very nice. Link to comment Share on other sites More sharing options...
Moderators Andavari Posted November 10, 2005 Moderators Share Posted November 10, 2005 Seems like my machine won't accept this application <sigh> <{POST_SNAPBACK}> I don't know what to tell you. You could contact the program author to see if there's any files or specific file version that the program needs to run. Link to comment Share on other sites More sharing options...
Moderators Andavari Posted November 10, 2005 Moderators Share Posted November 10, 2005 This should answer it at the bottom of the page it states: Required FilesVB6 Common Control Runtime Download MS VB6 Runtime from Microsoft here. Link to comment Share on other sites More sharing options...
Humpty Posted November 11, 2005 Share Posted November 11, 2005 Damn good proggy that.Thanks Rridgely. Link to comment Share on other sites More sharing options...
Ptath Posted November 11, 2005 Share Posted November 11, 2005 This should answer it at the bottom of the page it states: Download MS VB6 Runtime from Microsoft here. <{POST_SNAPBACK}> Downloaded it but, still the same problem. I'll take your advice and try and contact the author. Thanks for trying, Andavari !! Link to comment Share on other sites More sharing options...
Tarun Posted November 11, 2005 Share Posted November 11, 2005 http://www.dll-files.com/dllindex/dll-files.shtml?iphlpapi Link to comment Share on other sites More sharing options...
DONALDRAYVESSELL2006 Posted March 6, 2006 Share Posted March 6, 2006 Tried this little application ... When I ran it, I got an error message that came up as follows: Run-time error '453' Can't find DLL entry point AllocateAndGetTcpExTableFromStack in iphlpapi.dll Anyone know what this means? I NORMALLY DONT POST ALOT BECAUSE OF UPPERCASE MY PREFERENCE BUT JUST GOOGLE (iphlpapi.dll) IF YOU CAN READ THIS YOU CAN RECTIFY THE MALADY. Link to comment Share on other sites More sharing options...
Moderators rridgely Posted March 7, 2006 Author Moderators Share Posted March 7, 2006 why can you only type in uppercase? Maybe press the little button that says caps lock. Link to comment Share on other sites More sharing options...
Eldmannen Posted March 7, 2006 Share Posted March 7, 2006 Think you can do the same with; netstat -a Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now