Help - Search - Members
Full Version: Hidden Folder
Piriform Forums > Piriform Software > CCleaner Discussion
sweetie70
I have reason to believe that CCleaner removed a hidden folder: $Ntuninstallwmp11$. I am having sound problems in Windows Media Player 11. I can barely hear the sound when an email with "wmv" opens in WM Player. I am unable to turn the sound up. Can you help me restore that hidden file???? Please! I am a novice and should never have used CCleaner. I have been trying to "restore" my laptop to an earlier date (several of them) prior to CCleaner and it says I can not restore. Thank you, Pat :(
P.S. Am using Windows XP with Service Pack 3
davey
QUOTE (sweetie70 @ Nov 13 2008, 04:13 PM) *
I have reason to believe that CCleaner removed a hidden folder: $Ntuninstallwmp11$.
Thank you, Pat sad.gif
P.S. Am using Windows XP with Service Pack 3

Hello sweetie70,
Welcome to the forums.
$Ntuninstallwmp11$ is the name of an MS uninstall program for Windows Media Player11.
I use WinXP Pro SP3 also. I did experience a problem with WMP11 after the MS updates on November 11,2008.
There were 3 updates for WMP11 on that date.
My PC would not pick-up the presence of my DVD/CD drives.
I used the Set Program Access and Defaults to remove access to Windows Media Player and then I reset the check mark to allow access and Windows Media Player was reset and my PC then again recognized the presence of my DVD/CD drives. I did not notice if I had sound problems also at the time.
Maybe this will work for you also.
Good luck,
smile.gif davey
sweetie70
QUOTE (davey @ Nov 13 2008, 10:07 PM) *
Hello sweetie70,
Welcome to the forums.
$Ntuninstallwmp11$ is the name of an MS uninstall program for Windows Media Player11.
I use WinXP Pro SP3 also. I did experience a problem with WMP11 after the MS updates on November 11,2008.
There were 3 updates for WMP11 on that date.
My PC would not pick-up the presence of my DVD/CD drives.
I used the Set Program Access and Defaults to remove access to Windows Media Player and then I reset the check mark to allow access and Windows Media Player was reset and my PC then again recognized the presence of my DVD/CD drives. I did not notice if I had sound problems also at the time.
Maybe this will work for you also.
Good luck,
smile.gif davey

THANK YOU DAVEY FOR YOUR REPLY. I CAN TRY YOUR SUGGESTION, HOWEVER WHERE DO I FIND "SET PROGRAM ACCESS AND DEFAULTS"?
Pat
YoKenny
Welcome Pat.

Please check your CapsLock key as you are typing in ALL CAPITALS which is considered SHOUTING.

You can access Set Program Access and Defaults through Add or Remove Programs or start All Programs top left

sweetie70
QUOTE (YoKenny @ Nov 17 2008, 10:36 AM) *
Welcome Pat.

Please check your CapsLock key as you are typing in ALL CAPITALS which is considered SHOUTING.

You can access Set Program Access and Defaults through Add or Remove Programs or start All Programs top left


Sorry, I was not shouting.
I found the Set Program Access and Defaults. I went to Microsoft Windows and scrolled down to Choose a default media player: There was a check next to Use my current media player. A few lines down I found Windows Media Player with no check, but to the right of it was checked Enable access to this program. I monkeyed around with the check marks, but it did not increase the Windows Media Player sound. I also wonder if I can go back to SP2. This may have happened in WMP when I went to SP3???
Pat
YoKenny
I am listening to The Who's Magic Bus right now in Windows Media Player Version 11.0.5721.5230 on XP Pro SP3 and I know the same song works on my XP Home SP3 system

My Altec Lansing VS2221 speakers are nice but I have to be careful as the Sub Woofer can vibrate these walls in my apartment quite easily.

My audio is the built in SoundMAX on my IBM ThinkCentre ( Canadian ) system.

I am going to listen to some Bruce Springsteen now.
sweetie70
QUOTE (YoKenny @ Nov 17 2008, 12:31 PM) *
I am listening to The Who's Magic Bus right now in Windows Media Player Version 11.0.5721.5230 on XP Pro SP3 and I know the same song works on my XP Home SP3 system

My Altec Lansing VS2221 speakers are nice but I have to be careful as the Sub Woofer can vibrate these walls in my apartment quite easily.

My audio is the built in SoundMAX on my IBM ThinkCentre ( Canadian ) system.

I am going to listen to some Bruce Springsteen now.


YoKenny:

Well, I just have a Dell Inspiron 1100 Laptop and use the speakers built into the unit. I am using the same WMP Version as you are in XP Home SP3 system.

Something else must be wrong as I can just b a r e l y hear the sound???????????? Any ideas?

JDPower
Is it ONLY Windows Media Player that has the low volume problem? (BTW CCleaner does not, by default, remove that folder you mentioned)
YoKenny
QUOTE (sweetie70 @ Nov 17 2008, 05:48 PM) *
YoKenny:

Well, I just have a Dell Inspiron 1100 Laptop and use the speakers built into the unit. I am using the same WMP Version as you are in XP Home SP3 system.

Something else must be wrong as I can just b a r e l y hear the sound???????????? Any ideas?
When I had an IBM ThinkPad laptop it had a small volume control on the side that could take the sound from inaudible to audible in quiet surroundings so I used external powered speakers or headphones if I wanted to listen to music.
Andavari
QUOTE (sweetie70 @ Nov 17 2008, 04:48 PM) *
Well, I just have a Dell Inspiron 1100 Laptop and use the speakers built into the unit. I am using the same WMP Version as you are in XP Home SP3 system.

Something else must be wrong as I can just b a r e l y hear the sound???????????? Any ideas?

Have you tried doing a cold boot which is:
1. Turn off your computer, for about 60 seconds.
2. Start your computer.

Other than that you may need to go into the Play Control settings as something could be muted or has the volume turned way down.

To get into Play Control:
1. Click Start, Run, type in: sndvol32
2. Click OK to open Play Control.
3. Make sure the volume levels are turned up enough. Typically the Wave/MP3 setting can be the culprit.
sweetie70
QUOTE (Andavari @ Nov 18 2008, 04:50 AM) *
Have you tried doing a cold boot which is:
1. Turn off your computer, for about 60 seconds.
2. Start your computer.

Other than that you may need to go into the Play Control settings as something could be muted or has the volume turned way down.

To get into Play Control:
1. Click Start, Run, type in: sndvol32
2. Click OK to open Play Control.
3. Make sure the volume levels are turned up enough. Typically the Wave/MP3 setting can be the culprit.


Yes, I have done both. The cold boot and all the volumes are a high as they can be and all balanced. I wonder if it could be the RegCure that I bought on line and used? Being a novice I should not do those things. I should leave to the professionals. Any more ideas?
Thanks for your replys.
Andavari
QUOTE (sweetie70 @ Nov 18 2008, 09:46 AM) *
Any more ideas?

Dell tech support pages, or help from them via the phone would be my next thought. It could be something really simple, then again it may not be such a simple fix.

Using aggressive registry cleaners can create more problems than they attempt to "fix."
sweetie70
QUOTE (Andavari @ Nov 18 2008, 12:55 PM) *
Dell tech support pages, or help from them via the phone would be my next thought. It could be something really simple, then again it may not be such a simple fix.

Using aggressive registry cleaners can create more problems than they attempt to "fix."


Being a novice I am not so sure I will be able to figure out my problem.
I will read up on your suggestions, however. Thank you.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2009 Invision Power Services, Inc.