Jump to content

Return to Piriform.com

Photo

S.M.A.R.T.


  • Please log in to reply
1 reply to this topic

#1 OFFLINE ishan_rulz

ishan_rulz

    Lazy Perfectionist

  • Members
  • PipPipPipPip
  • 1,644 posts
  • Gender:Male
  • Location:Bangalore, India.
  • Interests:Everything. Nothing.

Posted 23 October 2010 - 11:58 AM

S.M.A.R.T
01 Read Error Rate 200 (199 worst) Data 0000000974
03 Spin-Up Time 185 (183) Data 00000006D6
04 Start/Stop Count 099 (099) Data 000000051F
05 Reallocated Sectors Count 200 (200) Data 0000000000
07 Seek Error Rate 100 (253) Data 0000000000
09 Power-On Hours (POH) 093 (093) Data 00000014A6
0A Spin Retry Count 100 (100) Data 0000000000
0B Recalibration Retries 100 (100) Data 0000000000
0C Device Power Cycle Count 099 (099) Data 0000000503
BF G-sense error rate 034 (034) Data 0000000042
C0 Power-off Retract Count 200 (200) Data 0000000133
C1 Load/Unload Cycle Count 188 (188) Data 0000008E7B
C2 Temperature 106 (071) Data 0000000029
C4 Reallocation Event Count 200 (200) Data 0000000000
C5 Current Pending Sector Count 200 (200) Data 0000000000
C6 Uncorrectable Sector Count 100 (253) Data 0000000000
C7 UltraDMA CRC Error Count 200 (200) Data 0000000000
C8 Write Error Rate / Multi-Zone Error Rate 100 (253) Data 0000000000
F0 Head Flying Hours 093 (093) Data 0000001407
F1 200 (200) Data 00BDF20ADD
F2 200 (200) Data 00A264FF4E
Temperature 43 C
Temperature Range ok (less than 50 C)
Status Good


What does the Read Error Rate mean?
Complexity is subjective.

#2 OFFLINE Nergal

Nergal

    Volunteer CCleaner Demon/Post Meddler

  • Moderators
  • 6,212 posts
  • Gender:Male
  • Location:Get off my Lawn, y'darn kids!
  • Interests:being grumpier
    Laughing
    Crying
    Sleep comes Later though.

Posted 24 October 2010 - 05:21 PM

Indicates the rate of hardware read errors that occurred when reading data from a disk surface. The raw value has different structure for different vendors and is often not meaningful as a decimal number.


http://en.wikipedia....R.T._attributes
ADVICE FOR USING CCleaner'S REGISTRY INTEGRITY SECTION
DON'T JUST CLEAN EVERYTHING THAT'S CHECKED OFF.
Do your Registry Cleaning in small bits (at the very least Check-mark by Check-mark)
ALWAYS BACKUP THE ENTRY, YOU NEVER KNOW WHAT YOU'LL BREAK IF YOU DON'T.
CCLEANER, RECUVA, DEFRAGGLER AND SPECCY DOCUMENTATION CAN BE FOUND AT www.piriform.com/docs
Link to Winapp2.ini explanation